Receivers are like coastal fishermen: they're comfortable with the sound. You see, because "sound" can mean a body of water but it can also mean a thing that you listen to, and that's what receivers work with. Oh, you got it? You just didn't feel like laughing? Well, I guess everybody is entitled to their own opinions regarding comedy.
Features
The DN-AVRX3300 7.2 Channel Surround AV Receiver features Dolby Atmos decoding for the ultimate immersive audio experience.
The 4k/60Hz full-rate pass-through, built-in dual-band Wi-Fi and Bluetooth, and 105W per channel speaker outputs make this powerhouse the perfect audio and video receiver.
Connect to your internal network via the RJ-45 Ethernet LAN port and enjoy streaming services such as Spotify, Pandora and SiriusXM - and also choose from thousands of global Internet radio stations.
AirPlay enables wireless connectivity from iPod Touch, iPhone and iPad.
- 7.2 channel AV Receiver with 105W per channel (8ohms, 20Hz – 20kHz with 0.08% T.H.D.)
- Commercial grade internal power supply (no bulky AC adapter)
- Rack kit (Removable)
- Built-in Wi-Fi with 2.4GHz/5GHz dual band support; built-in Bluetooth
- 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR and BT.2020
- 8 HDMI inputs (incl. 1 front) with full HDCP 2.2 support; 2 HDMI outputs
- Dolby Atmos (up to 5.1.2) and DTS:X (via firmware update)
- Advanced Multi-Room options; 7.2ch Pre-out; RS232 Control
- AirPlay, Bluetooth, Internet Radio, Spotify Connect, Pandora, SiriusXM Network Audio Streaming
*Please note that these units are new but ship in Denon Professional brown box.*
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 2 Years Denon
Specs
Number of Power Amps
- 7 (Front L/R, Center, Surround L/R,Surround Back L/R)
Power Output
- 215 watts per channel (maximum power output per channel)
- 135 watts per channel (6 ohms, 1 kHz, THD 0.7%, 2ch driven)
- 105 watts per channel (8 ohms,20 Hz - 20 kHz, THD 0.08%, 2ch driven)
- Speaker impedance: 4-16 ohms
Preamplifier Section
- Input sensitivity: /impedance 200 mV / 47 kohms
- Frequency response: 10 Hz - 100 kHz — +1, –3 dB (DIRECT mode)
- S/N Ratio: 100 dB (IHF-A weighted, DIRECT mode)
FM Section
- Tuning frequency range: 87.5 - 107.9 MHz
AM Section
- Tuning frequency range: 520 kHz – 1710 kHz
General
- Power supply: AC 120 V / 60 Hz
- Power consumption: 600 W (Standby 0.1 W, CEC standby 0.5 W)
- Power consumption: No-Sound 45 W (ECO on), 80 W (ECO off)
- Dimensions: (W x H x D) 17.1 x 15.3 x 6.6 inches (434 x 389 x 168mm) (without rack ears)
- Weight: 23.8 lbs. (10.8kg) (without rack ears)
In
- HDMI (Front 1) x 6
- Component (video) x 2
- Analogue Audio x 5
- Digital Optical / Coaxial x 2 / x 2
- USB (front) x 1
Out
- HDMI Monitor / Zone 2 x 1 / x 1
- Composite Monitor x 1
- Audio Preout (SW) 7.2 ch
- Zone 2 Preout 2.0 ch
- Phones x 1
Other
- Ethernet x 1
- Setup Microphone Port x 1
- FM Tuner Antenna x 1
- AM Tuner Antenna x 1
- RS232 /12 V Trigger out x 1 / x 1
In The Box: *Please note that these units are new but ship in Denon Professional brown box.*
- Denon Professional DNAVRX3300 7.2 Channel AV Surround Receiver with Wi-Fi, Bluetooth, Ethernet Connectivity
- Power Cable
- Remote Control
- Rack Ears & Screws
- FM Indoor Antenna
- AM Loop Antenna
- Sound Calibration Microphone
- Sound Calibration Microphone Stand
Specs
Number of Power Amps
- 7 (Front L/R, Center, Surround L/R,Surround Back L/R)
Power Output
- 215 watts per channel (maximum power output per channel)
- 135 watts per channel (6 ohms, 1 kHz, THD 0.7%, 2ch driven)
- 105 watts per channel (8 ohms,20 Hz - 20 kHz, THD 0.08%, 2ch driven)
- Speaker impedance: 4-16 ohms
Preamplifier Section
- Input sensitivity: /impedance 200 mV / 47 kohms
- Frequency response: 10 Hz - 100 kHz — +1, –3 dB (DIRECT mode)
- S/N Ratio: 100 dB (IHF-A weighted, DIRECT mode)
FM Section
- Tuning frequency range: 87.5 - 107.9 MHz
AM Section
- Tuning frequency range: 520 kHz – 1710 kHz
General
- Power supply: AC 120 V / 60 Hz
- Power consumption: 600 W (Standby 0.1 W, CEC standby 0.5 W)
- Power consumption: No-Sound 45 W (ECO on), 80 W (ECO off)
- Dimensions: (W x H x D) 17.1 x 15.3 x 6.6 inches (434 x 389 x 168mm) (without rack ears)
- Weight: 23.8 lbs. (10.8kg) (without rack ears)
In
- HDMI (Front 1) x 6
- Component (video) x 2
- Analogue Audio x 5
- Digital Optical / Coaxial x 2 / x 2
- USB (front) x 1
Out
- HDMI Monitor / Zone 2 x 1 / x 1
- Composite Monitor x 1
- Audio Preout (SW) 7.2 ch
- Zone 2 Preout 2.0 ch
- Phones x 1
Other
- Ethernet x 1
- Setup Microphone Port x 1
- FM Tuner Antenna x 1
- AM Tuner Antenna x 1
- RS232 /12 V Trigger out x 1 / x 1
In The Box: *Please note that these units are new but ship in Denon Professional brown box.*
- Denon Professional DNAVRX3300 7.2 Channel AV Surround Receiver with Wi-Fi, Bluetooth, Ethernet Connectivity
- Power Cable
- Remote Control
- Rack Ears & Screws
- FM Indoor Antenna
- AM Loop Antenna
- Sound Calibration Microphone
- Sound Calibration Microphone Stand
Sales Stats
- Speed to First Woot:
- 32m 5.115s
Purchaser Experience
Purchaser Seniority
Quantity Breakdown
Percentage of Sales Per Hour
12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
---|