Clearance
Aisidra Bluetooth Transmitter Receiver, V5.0 Bluetooth Adapter for Audio, 2-in-1 Bluetooth AUX Adapter
Limit 3 per customer
Learn to throw your voice, fun at parties, amuse your friends!
Features
Universal 2-in-1 Bluetooth Adapter
In TX mode, the Bluetooth transmitter is plugged into non-Bluetooth devices such as TVs, PCs and MP3 players via AUX/RCA jack and transmits audio to Bluetooth headphones/speakers/soundbars; in RX mode, the Bluetooth receiver can be connected to wired speaker/earphones and to receive audio from smartphones via Bluetooth.
Stable connection, stereo sound
Equipped with latest mature Bluetooth chip and well-design software, the Bluetooth adapter is an up-to-date audio adapter, not only helps to upgrade your old audio devices to Bluetooth capable without replacing them but also promises you a CD-like auditory feast.
Seamless streaming, never miss a beat
With low latency encoder applied, the audio delay has been minimized to approximately 40ms, the Bluetooth transmitter will present fully synchronized audio and video. Note: Bluetooth headphones/speakers are also required to support low latency technology.
Dual connection, share your joy
Being able to pair with two devices simultaneously, Aisidra Bluetooth transmitter can fulfill your thoughts of watching movies together with your love one using Bluetooth headphones, or to volume up music with two Bluetooth speakers playing concurrently.
Working while charging, nonstop fun
Installed battery could support the Bluetooth adapter to work for 10 hours per full charge. When in the low battery status, the adapter could be plugged into power to get charged while working at the same time.
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 90 Day Woot Limited Warranty
Specs
- Brand: Aisidra
- Hardware Interface: Bluetooth, USB
- Compatible Devices: Desktop, Smartphone
- Item Dimensions LxWxH: 1.88 x 1.39 x 0.43 inches
- Data Link Protocol: Bluetooth, USB
In the Box:
- (1) Aisidra Bluetooth Transmitter Receiver
FAQ About AirPods:
Q: Unable to pair Airpods with the Bluetooth adapter?
If the adapter keep flashing red and blue and is unable to pair with your Airpods, please kindly follow the steps below to reset and re-pair them.
1.Firstly, turn off the adapter. Secondly, switch the adapter from TX mode to RX mode. Then turn it on, wait for 5 seconds, turn it off and switch back to TX mode.
2.Press and hold the circle button rear of the AirPods for 3s to reset it. The AirPods will be set into pairing mode with the light flashing white.
3.Now please kindly switch the adapter into TX mode and re-pair the adapter with the AirPods.
Note: while pairing the adapter with your AirPods, please kindly turn off the Bluetooth of other devices, especially those that had paired with your AirPods.
Q: How to control volume after the adapter is paired with AirPods?
A: Please kindly adjust the volume of the output audio via the audio source device.
Q: How to pair the adapter with two AirPods at the same time?
1. Press and hold the circle button rear of the first AirPods for 3s to set it into pairing mode. And then turn on the adapter in TX mode to pair the adapter with the first AirPods.
2. Tap the power button twice to set the adapter into pairing mode again.
3. Set the second AirPods into pairing mode according to the first step. Then the adapter will pair with second AirPods automatically.
Frequent Questions & Answer
*Can it automatically re-pair? Normally, the adapter will re-pair to previous paired devices when it is turned on. Only when the pairing history is cleared by a mode switch or the pairing memory is replaced by other devices, it will fail to auto re-pair.
*aptX low latency? There is no delay when running aptX Low Latency codec. Please kindly make sure your Bluetooth headphones/speakers are also supported to that codec.
*Musical instrument? For live music or musical instruments, we suggest using specialized adapter.
*Intermittent sound? When the sound is lower than a certain volume, the CSR chip will not detect the signal and cannot transmit that sound. In this case, please kindly increase the volume.
*No sound or sound still from TV? Please ensure the aux cable is tightly plugged into “AUDIO OUT” or headphone jack in your TV and both devices are successfully paired. Then change the TV’s sound settings from “TV speaker” to “Audio out”.
*Make phone calls? The adapter doesn’t have a built-in mic, so it cannot support any calls or communication, and can only play or listen to sound.
Specs
- Brand: Aisidra
- Hardware Interface: Bluetooth, USB
- Compatible Devices: Desktop, Smartphone
- Item Dimensions LxWxH: 1.88 x 1.39 x 0.43 inches
- Data Link Protocol: Bluetooth, USB
In the Box:
- (1) Aisidra Bluetooth Transmitter Receiver
FAQ About AirPods:
Q: Unable to pair Airpods with the Bluetooth adapter?
If the adapter keep flashing red and blue and is unable to pair with your Airpods, please kindly follow the steps below to reset and re-pair them.
1.Firstly, turn off the adapter. Secondly, switch the adapter from TX mode to RX mode. Then turn it on, wait for 5 seconds, turn it off and switch back to TX mode.
2.Press and hold the circle button rear of the AirPods for 3s to reset it. The AirPods will be set into pairing mode with the light flashing white.
3.Now please kindly switch the adapter into TX mode and re-pair the adapter with the AirPods.
Note: while pairing the adapter with your AirPods, please kindly turn off the Bluetooth of other devices, especially those that had paired with your AirPods.
Q: How to control volume after the adapter is paired with AirPods?
A: Please kindly adjust the volume of the output audio via the audio source device.
Q: How to pair the adapter with two AirPods at the same time?
1. Press and hold the circle button rear of the first AirPods for 3s to set it into pairing mode. And then turn on the adapter in TX mode to pair the adapter with the first AirPods.
2. Tap the power button twice to set the adapter into pairing mode again.
3. Set the second AirPods into pairing mode according to the first step. Then the adapter will pair with second AirPods automatically.
Frequent Questions & Answer
*Can it automatically re-pair? Normally, the adapter will re-pair to previous paired devices when it is turned on. Only when the pairing history is cleared by a mode switch or the pairing memory is replaced by other devices, it will fail to auto re-pair.
*aptX low latency? There is no delay when running aptX Low Latency codec. Please kindly make sure your Bluetooth headphones/speakers are also supported to that codec.
*Musical instrument? For live music or musical instruments, we suggest using specialized adapter.
*Intermittent sound? When the sound is lower than a certain volume, the CSR chip will not detect the signal and cannot transmit that sound. In this case, please kindly increase the volume.
*No sound or sound still from TV? Please ensure the aux cable is tightly plugged into “AUDIO OUT” or headphone jack in your TV and both devices are successfully paired. Then change the TV’s sound settings from “TV speaker” to “Audio out”.
*Make phone calls? The adapter doesn’t have a built-in mic, so it cannot support any calls or communication, and can only play or listen to sound.
Sales Stats
- Speed to First Woot:
- 3m 22.445s
Purchaser Experience
Purchaser Seniority
Quantity Breakdown
Percentage of Sales Per Hour
| 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
|---|
Woots by State
zero wooters wootinglots of wooters wooting
Best sellers
Deals our customers love best.
