2PC Non Slip Black Furniture Pads

I use track balls for my PCs/laptops and one of them had one of the rubber base pieces on the bottom come off and I couldn't find it. I purchased this to replace it and it works well. I was able to trim it with scissors easily to custom fit the base piece into the slot needed on the bottom of the trackball. It was the right thickness to match the other rubber base pieces and has been in place for months now. Now the track ball base doesn't slide around anymore. This really worked well! :)

I used a small strip of the Rubber Furniture Pad as a means to keep my phone from sliding off the “Phone Rest” of the cordless charger I use. The Rubber Furniture Pads are very easy to cut, into pieces to the sizes you need. I cut a strip from one of the Pads (Refer to the Pictures) and by scoring the paper backing, I was able to peel off a portion of the paper while leaving a small strip still in place. I then positioned the piece of pad onto the cordless charger. The adhesive adheres to the plastic charger base and does not seem like it will peel off easily - time will tell. It works great and the phone no longer slides off its charging rest. There is only one thing I would ask to be added to the Pads as a benefit to this product and that would be for grid lines to be printed on the backing paper to make it easier to make straight cuts.

This stuff works quite well. The adhesive side sticks and stays stuck. The other, non-adhesive side keeps my stuff from sliding around. It's important to realize that the non-adhesive side is just that... non-adhesive. It won't stick to your shelf, tabletop, desk, or whatever. However, the rubbery surface doesn't want to slide, and as long as what you've attached it to has some weight, you'll be thrilled with how this works. And, the more weight, the harder it works. The take is surprisingly thick, about 1/10". It's also not spongy and won't provide much cushioning. However, it does what it's supposed to do, as described in the attached video. If you're looking to keep things from sliding around, and those things have even a small amount of weight, then you'll be happy with this stuff.

This is great. I’m not sure about the negative reviews about adhesion problems (Maybe they got a poorly stored sheet) The adhesive in mine was strong. My expensive Bang & Olufsen speaker got damaged (the bottom I the speaker is made of a soft rubber that prevents the speaker from falling or moving around when used at maximum volume). I traced the damaged rubber with a pencil and cut the sheet with regular scissors. Now, my speaker works perfectly and best of all it doesn't move around on a table or any surface thanks to this! I would definitely recommend because it is easy to use, is not very thick to cut, and the antislip works perfect. Remember that you have to peel off the film from the antislip side as well!

These work perfectly for my needs. I bought a couple of electronics recently that had no non-slip feet. These work perfectly to keep them from sliding around - or gods forbid - slipping off my desk. These are full sheets/one giant piece of the product. You have to cut the shape you want yourself. I was too lazy to draw straight lines out with a ruler so my pieces aren’t my perfect, but I don’t care too much in this case. I prefer it being customizable. I used short strips in some cases and longer ones in others.

Bought to place on the bottom legs of a dog crate. The pieces I cut were about a 1 inch squares. After a few weeks, one of them came off, it doesn't seem to help from sliding much.

I bought this for the several KOBOLT mini tool boxes that my family has. This keeps them from moving all over the desk or table. It makes it easier to open the drawers as well. When you need something to stay in place. This does the job.

Items are as I expected.

The moment I opened the packaging and removed the pads I was highly confident they would do the trick and keep my external hard drive enclouser from sliding around and when I applied them to it my intuition was correct, they work even better that the other non slip pads I have on my other external hard drive enclosures. When removing the outer product description paper I felt some resistance to removing it and the pads felt kind of sticky or grippy, not sticky as in something like a sticky liquid got on them but sticky as in they will stay in place and won't move without putting some force on them. Maybe the one possible problem might be that the adhesive on them is not real strong because on one piece I cut out lost it's adhesive when I pealed the paper backing off it but maybe that was because I used too much force trying to get the paper backing off. I'm not trying to keep in place anything heavy duty so it's not like it will be a problem as long as the pads stay in place over many long years of use. Much better than the other non slip pads I bought previously that were more specific to just furniture. When I saw 3M on the paper backing I figured they should be high quality if they have a quality well known brand of adhesive on them. All around I'm happy with the product so far but only time will tell.

I want to thank the person who bought this, cut it up, used a piece and sent it back. Your sizes that you cut are perfect for me too.