Sig Sauer SOR52001 Black (Open Box)

I received this in the factory sealed box, and with the factory tamper proof seal in tact! The sight came boxed with the, Mounting key, Lens cloth, Battery, 2 mounts, lens cap, Instruction Sheet. This is a very nice sight, easy to mount, clear optics. Clearing up the misinformation about this sight. A few things that's important to know about the optic! (1) Read over the instruction sheet, don't just think you've had these types of sights before and you know how this one works and end up leaving bad reviews. (2) Yes! the sight has an auto off after 120 seconds of "No Motion" and auto motion ON so, yes if it stored in a vehicle the motion of it will keep the red dot illuminated and cause an unnecessary battery drain. If you've read the instruction sheet it informs you that the sight also an actual Power Off and Power On option, to use this option you only have to hold down on either the + or - button longer than 1 second, and the same thing to power it back on. (3) reports of the sight not working in MOST cases is caused from one of couple of things, when you first install the battery you will not be able to see the red dot until you turn up the brightness, so click the + button (Don't Hold It Down At First, Just Click It) 3 or 4 times if you still don't see the dot assume the sight is in its Powered Off Mode and push and hold either the + or the - button for 1-Second to actually turn the sight on, then click the + (plus) button a few times until the dot becomes bright enough to see. (4) Another possible problem that could happen is with installing the battery, mine had a safety peel off sticker that HAS to be removed, well due to certain conditions when you peel these off it leaves adhesive (glue) on the battery so its possible to leave enough as to cause a loss of battery contact. Make sure when you peel the sticker off from the battery that all the adhesive is cleaned off of the battery itself. _______________________________________________________________________ !Caution! the brightness adjustments in either direction ISN'T A PUSH & HOLD operation!!!!! its momentary CLICKS! That means that the brightness setting isn't a constant veritable, its in CLICKED STEPS! !Caution! holding down for more than one second on either the Plus or the Minus button actually turns the optic sight OFF (totally powering it down) meaning that just clicking the brightness buttons (Plus or Minus) will not do anything until the optic sight is "Turned Back On" Bottom line on the misinformation of this optic, its has some higher level electronics then the standard red dots, its not rocket science to understand, but its cause for a lot of these being returned and the reason for a lot of the low rated reviews. Its NOT only "Auto Powered Controlled" it can be Turned Off, and it can be done so by accident. PLEASE read over the instruction sheet FIRST before you box this sight up and return it, its quality enough to deserve that much attention. Bottom line on the optic sight itself. Let me make this clear! This review is from a 64 year old AR-15 (5.56 NATO) gun owner!! The sight responded well to adjustments! Seems to be holding ZERO very well with what ammo I've fired so far! It has very clear optics! Having the turret adjusting bits built onto the turret caps works very well! There is no issues with the quality or function of this sight that I can find, but I'm thinking that the same sight upgraded to the larger tube and lenses might be NICE! but it would be larger and it cost more! Very Nice for the money!