10 Pairs Full Extension Drawer Slides (Open Box)

I have used about 20 pairs of these drawer slides so far, all with drawer boxes and cabinets that I built. Drawer boxes need to be 1" narrower than the cabinet box opening (1/2" on each side). If you are building your own boxes, this means you need to be exact to within a 1/16" error either direction. If your box is the correct size, these slides work beautifully. They roll smoothly and very quietly and are full extension. It's true that the lack of directions in the box is a bit of a bummer, but once you figure out how to install one pair, you're good to go. It's pretty straightforward-- mount on piece to the inside of your cabinet box and mount the mating piece on the outside of your drawer, flush with the front of the drawer box, at the location that will result in the drawer being at the correct height once you slide the drawer in (the easiest is to mount flush to the bottom edge of the side of the drawer box). Anyway, great drawer slides at a great price. And no, they don't come with screws, but is that really a reason to give otherwise-great slides a poor review? Go and buy a box of 100 screws at the Blue or Orange store and get to work!