• 5.5 inches long and comes in a set of two.
• The WEFTY has a tab at the end for looping the end of the strip

The WEFTY is designed specifically for use with fabric strips, either cut width of fabric or on the bias, single or double fold. Prepping Strips Cut your strips two times the width you want your finished strip to be. Example: If you want to weave with 1/2 inch strips, cut your fabric into 1 inch strips. Place fabric strips wrong side up, fold raw edges to the middle, and press. Spray starch and bias tape makers are very helpful for this task. Using the WEFTY Hold the WEFTY so that wording is facing up and the tapered end faces down. Thread the fabric strip into the eye of the WEFTY and fold it neatly underneath itself. This keeps the fabric strip flat as you weave. The tapered end will help you weave the WEFTY into the pinned strips, however, you may use another WEFTY or other tool to hold up the strips you are weaving under. The grooves on the top of the WEFTY allow you to choose how to move it through your project: You may grip the WEFTY by the sides, or push it from the top using just your finger. When weaving in the third layer of a triaxial weave, thread the WEFTY while holding it so that the numbers and tapered end face up. This helps the WEFTY move through the multiple layers of fabric without bending too much.

Shipping Note: Shipping to Alaska, Hawaii, P.O. Boxes, and APO addresses is not available for this item

Warranty: 90 Day Woot Limited Warranty