Product Description:

TEKTON impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Precise 6-point openings provide an exact fit for hex fasteners. Each socket size meets a minimum of 1.3 times the ANSI/ASME standard for proof torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation. Includes: 1/2 inch drive deep 6-point impact sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, & 24 mm and 1 Storage Case. 

Two Size Markings

• The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.

Full-Length Socket Well

• Not only is the socket a deep length, but the interior well also extends far into the socket, which allows better fastener engagement in more situations.

Fully Stepped Shoulders

• The narrowed socket diameter goes all the way down to the base of the socket on small, deep-length sizes. This allows for better reach into tight, recessed areas.

Prevents Fastener Round-Off

• Radiused corners prevent fastener round-off by applying force to a fastener’s flat sides, rather than its corners.

Features: 

• Sizes are marked both with a high-visibility laser marking and a permanent stamped marking that won't wear off
• 6-point socket openings provide an exact fit for hex fasteners
• Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners
• Meets a minimum of 1.3 times the ANSI/ASME standard for proof torque
• High-density polyethylene case withstands common lubricants, fuels, and solvents

Shipping Note: Shipping to Alaska, Hawaii, APO addresses, or PO Boxes is not available for this item.

Warranty: 90 Day Woot Limited Warranty