Woot! customers who are Amazon Prime members can enjoy special shipping benefits on Woot!, including:
Amazon Prime membership required. See individual offer pages for shipping details and restrictions. Not valid for international shipping addresses.
Get started by logging in with Amazon or try a 30-day free trial of Amazon Prime*
Login with Amazon Try a 30-day free trial of Amazon Prime*Re-login required on Woot! for benefits to take effect
The units in this sale are being sold as open box condition. That means that they have been opened due to being a photo sample, a tested good customer return or having damaged packaging. Some non-essential items may be missing from the box. The unit may not be shipped in retail packaging. That is the reason for the reduced sale price and the reduced warranty.
Panamax’s MX5102 is specially designed and engineered for home theater systems. In addition to power management the battery backup prevents processor controlled devices and hard drive based sources from losing critical data and set up configurations, as well as allowing for a proper shut down procedure.
MX5102 prevents critical equipment from losing setup configuration, stored data and hard-disk crashes. Shuts off projection equipment via IR control to allow the projector bulbs to go through a proper cool-down cycle before shutting off.
Level 3 Power Cleaning and Linear Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.
The MX5102 is designed to provide noise isolation between 4 isolated outlet banks including 2 high current, and 2 battery backup outlets so that any noise created by an A/V component can not contaminate the power going to equipment plugged into another outlet bank.
Panamax’s patent pending AVM circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red LED will be displayed on the front panel, and power to the connected equipment is automatically turned off for all outlets except for the battery connected outlets, if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Shipping Note: Shipping to Alaska and Hawaii is not available for this item.
A physical address is required for delivery. No Military or PO Box shipments available
Warranty: 30 Day Woot
| Weight | 27 lbs. |
| Product Warranty | 3 Years |
| Dimensions | 17”W x 13”D x 4”H |
| Undervoltage Shutoff | 90 ± 5V |
| Total Current Capacity | 12 A |
| Thermal Fusing | Yes |
| Overvoltage Shutoff, slow rise | 132 ± 5V |
| Overvoltage Shutoff, fast rise | 150 ± 5V |
| Line Voltage | 120V, 60Hz |
| Energy Dissipation | 1800 Joules |
| Catastrophic Surge Circuit | Yes |
| Attenuation | 30dB min from 100kHz-2MHz 50dB max @ 270kHz |
| Voltage | 120 ± 5% Simulated Sine Wave |
| UPS Transfer Time | < 10ms |
| UPS Output Capacity | 600VA 360W @ 0.6f |
| UPS Backup Time | 3 minutes at full load |
| Frequency | 60 Hz ± 1% |
| Voltage and Polarity | 3 - 18V DC, bidirectional |
| Jacks | 3.5mm (1/8”) mono mini-plug |
| Current Requirement | 4.6 mA @ 3V, 58 mA @ 24V |
| Wires Protected | 8-Wires |
| Jacks | RJ-45 |
| Clamping Level | 50V |
| Wires Protected | 2-Wires, Pins 4 & 5 |
| Suppression Modes | Metallic & Longitudinal |
| Jacks | RJ-11 |
| Fuseless/Auto-Resetting | Yes |
| Clamping Level | 270V |
| Shielded | Yes |
| Insertion Loss | < 0.5 dB |
| HD 1080 i/p Ready | Yes |
| Frequency Range | 0MHz - 2.2 GHz |
| Connections | Female ”F”, Gold Plated |
| Clamping Level | 75V |
| Bidirectional | Yes |
In the box: (Some items may be missing due to this product being open box condition)
| Weight | 27 lbs. |
| Product Warranty | 3 Years |
| Dimensions | 17”W x 13”D x 4”H |
| Undervoltage Shutoff | 90 ± 5V |
| Total Current Capacity | 12 A |
| Thermal Fusing | Yes |
| Overvoltage Shutoff, slow rise | 132 ± 5V |
| Overvoltage Shutoff, fast rise | 150 ± 5V |
| Line Voltage | 120V, 60Hz |
| Energy Dissipation | 1800 Joules |
| Catastrophic Surge Circuit | Yes |
| Attenuation | 30dB min from 100kHz-2MHz 50dB max @ 270kHz |
| Voltage | 120 ± 5% Simulated Sine Wave |
| UPS Transfer Time | < 10ms |
| UPS Output Capacity | 600VA 360W @ 0.6f |
| UPS Backup Time | 3 minutes at full load |
| Frequency | 60 Hz ± 1% |
| Voltage and Polarity | 3 - 18V DC, bidirectional |
| Jacks | 3.5mm (1/8”) mono mini-plug |
| Current Requirement | 4.6 mA @ 3V, 58 mA @ 24V |
| Wires Protected | 8-Wires |
| Jacks | RJ-45 |
| Clamping Level | 50V |
| Wires Protected | 2-Wires, Pins 4 & 5 |
| Suppression Modes | Metallic & Longitudinal |
| Jacks | RJ-11 |
| Fuseless/Auto-Resetting | Yes |
| Clamping Level | 270V |
| Shielded | Yes |
| Insertion Loss | < 0.5 dB |
| HD 1080 i/p Ready | Yes |
| Frequency Range | 0MHz - 2.2 GHz |
| Connections | Female ”F”, Gold Plated |
| Clamping Level | 75V |
| Bidirectional | Yes |
In the box: (Some items may be missing due to this product being open box condition)
| 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
|---|
