Features
Onkyo sound is 'Emotion. Delivered.' now with Dolby Atmos
Drivers don’t judge sports cars on top speed alone. Acceleration, cornering, and braking are equally important. It’s the same with A/V receivers- wattage is an indication of loudness, not sound quality. The real test is current. High instantaneous current realizes ultimate control of the speaker drivers for accurate and musical audio reproduction, from the most delicate piano passages the thunderous roar of an orchestra in full flight. High current is the cornerstone of our amplification philosophy, and no other brand can match Onkyo for dynamic driving power. We don’t just translate signals into sound. We create sound you can feel.
Spellbinding entertainment
Destined to intoxicate hi-fi enthusiasts as much as hardcore film and game lovers, the TX-NR838 Network A/V Receiver combines pure analog power with the latest in high-resolution audio and video processing. This heavyweight receiver is built around Onkyo’s 'Emotion. Delivered' high- current amplification concept with a massive customized transformer and discrete Three-Stage Inverted Darlington Circuitry. Hi-fi credentials are cemented with Pure Direct Analog Path, a selectable mode that shuts down all digital circuitry when you’re listening to LPs or other high- quality audio sources. Signals are routed via the phono or analog inputs to the amps for pristine sound that’s completely free of digital noise. Devotees of high-resolution, meanwhile, can stream their network-attached 5.6 MHz DSD or 192/24 hi-res albums using the remote app, while listeners seeking an instant fix can enjoy music from smartphone via inbuilt Wi-Fi and Bluetooth. The TX-NR838 is also packed full of cutting- edge features for movies and gaming, with 4K/60 Hz-ready HDMI terminals, HDCP 2.2 compatibility for future Ultra HD premium content, and the sheer power -at 160 Watts/Ch (6ohms 1kHz, 2 Channels Driven, FTC- that you need for awesome audio experience.
Engineered for pure exhilaration
Best-in-class high-current capability is achieved with Wide Range Amplifier Technology (WRAT). The design is built around a custom high-output transformer, customized 15,000 μF capacitors, and low-impedance copper bus-plates. Three-Stage Inverted Darlington Circuitry amplification features a discrete low-impedance output stage with high-current transistors cooled by a heavy-duty aluminum heat sink for instantaneous power and extremely low distortion. Unlike some A/V receivers, the audio and video processors, DAC section, networking, pre-amp, amplifiers, and power supply are all separated to minimize electrical interference on audio signals. The culmination of over 60 years’ audio engineering experience, WRAT preserves the life and character of the master recording while guaranteeing an emotionally moving experience whether you’re listening to compressed digital music, a treasured LP, or a hi-res movie soundtrack.
Dolby Atmos multidimensional sound
Onkyo is among the first to introduce the exciting Dolby Atmos surround-sound format to home theater environments. Dolby Atmos uses object-oriented mixing to layer independent audio elements through discrete channels, moving three-dimensional sound effects around the theater with astonishing realism. The format adapts to any home theater layout incorporating height channels for a more enveloping soundfield with extremely accurate directional and overhead effects.
Ready for next-generation Ultra HD entertainment
Five of the receiver’s seven HDMI inputs are based on the latest HDMI specification to support 4K video at 50/60 frames per second and 21:9 aspect ratio for theater-reference movie display. Now you can add thunderous 7.2-channel surround-sound to blockbuster 4K 50/60 Hz games and movies for a breathtakingly realistic entertainment experience. The TX-NR838 also supports the latest HDCP 2.2 DRM copy protection standard via HDMI Input 3 and the main output. Hollywood studios, satellite broadcasters, and internet video streaming services will adopt HDCP 2.2 for future 4K and Premium Studio
Reference-level sound in your home
THX certification guarantees the same high-volume, low-distortion sound of a commercial multiplex theater in your own listening space, with high-resolution studio-master soundtracks reproduced precisely as the director intended. Your TX-NR838 Network A/V Receiver has passed more than 2,000 laboratory bench tests across 75 categories and covering 14,000 individual data points to ensure that every aspect of audio performance meets rigorous THX standards for theater-reference sound. THX Select2 Plus is recommended for medium-sized rooms where the screen-to-seat viewing distance is about 3–4 meters (10–12 feet).
Wi-Fi and Bluetooth inside
The TX-NR838 has Wi-Fi and Bluetooth technology built in. For network audio, use the remote app to stream music stored on your smartphone and to locate and stream hi-res audio from any network-attached DLNA-certified device (such as a PC or NAS). There are no hidden adapter costs, no need for close proximity to an Ethernet wall socket, and no long runs of unsightly cable just to enjoy a stable network connection. The receiver also has Bluetooth 2.1 + EDR on board. Pair up and stream whatever audio is playing on your compatible device, from MP3s to albums on YouTube. Audio streamed via Bluetooth is enhanced with Onkyo’s Advanced Music Optimizer, a DSP mode that restores compressed files to close to their original fidelity for beautifully full and natural sound.
Engineered for Hi-res audio
Onkyo A/V receivers are engineered for universal hi-res compatibility and ease of use. It’s now remarkably easy to enjoy albums mastered in high-resolution that you’ve downloaded and stored on your computer or media server. The remote app very quickly locates the 192/24 and 96/24 high-resolution audio files on your network-attached storage devices and sends them via DLNA to the receiver with zero loss in quality. Almost every hi-res and lossless format is supported, from gapless FLAC and WAV to ALAC and WMA. The TX-NR838 also handles 5.6 MHz DSD and Dolby TrueHD formats for the ultimate in depth and clarity. With surpassing DSP power, high-quality TI Burr-Brown D/A conversion, and Onkyo’s low-distortion amplification, hi-res music on your home theater is not only easy to enjoy, it sounds absolutely fantastic as well.
Share your HD video sources in two zones
The HDMI Sub out can be used to connect your A/V receiver to a second display in another room. Now you can route 1080p content from the media players in your home theater room via the receiver and play it back in Zone 2. Enjoy your favorite Blu-ray Discs, cable TV shows, and other HD content in the kitchen, den, or bedroom with easy playback control via smartphone or tablet.
Shipping Note: Shipping to Alaska, Hawaii, PO Box and APO addresses is not available for this item
Warranty: 2 Year Onkyo
Specs
Amplifier: | |
---|---|
Channels: | 7.2 |
All Channels: | 130W (8 Ohms, 20 Hz-20 kHz, 0.08%, 2 channels driven, FTC) 160W (6 Ohms, 1 kHz, 0.7%, 2 channels driven, FTC) |
Dynamic Power (front): | 300W (3Ω, Front) 250W (4Ω, Front) 150W (8Ω, Front) |
THD+N: | 0.08% (20Hz - 20kHz, Half Power) |
Damping Factor: | 60 (Front, 1kHz, 8Ω) |
Input Sensitivity & Impedance: | 200 mV/47 kΩ (Line) 2.5 mV/47 k-ohms (Phono MM) |
Rated RCA Output Level & Impedance: | 200 mV/2.2 k-ohms (Line out) |
Maximum RCA Output Level & Impedance: | 4.6 V/470 Ohms (Line Out) |
Phono Overload: | 70 mV (MM, 1 kHz, 0.5%) |
Frequency Response: | 5 Hz - 100 kHz/+1 dB, -3 dB (Direct Mode) |
Tone Control: | ±10 dB, 30Hz (Bass) ±10 dB, 20kHz (Treble) |
Signal to Noise Ratio: | 106 dB (Line, IHF-A) 80 dB (Phono MM, IHF-A) |
Speaker Impedance: | 4 - 16Ω or 6 - 16Ω |
System: | |
---|---|
Processing: | Dolby Atmos, TrueHD, DD Plus, PLIIz DTS-HD Master Audio 192kHz/24-bit D/A Converters Dual 32-Bit Digital Signal Processing Engines Theater-Dimensional Virtual Surround Function Direct Mode and Pure Audio Mode |
Internet Radio Services | Pandora, Spotify, Sirius/XM, Slacker, Aupeo!, TuneIn |
Inputs: | (7) HDMI (1 MHL-Enabled front) (2) Digital Audio (optical) (3) Digital Audio (coaxial) (6) Analog Audio (3) Composite Video (1) Component Video (1) RJ-45 (1) USB (front) (1) FM Antenna (1) AM Antenna (1) Phono |
Outputs: | (2) HDMI (1) Composite Video (1) Component Video Binding Post Terminals (L/R) (1) Zone 2 PRE Line-out (L/R) (1) Zone 3 PRE Line-out (L/R) (4) PRE Out (L/R) (Front, Center, Surround, Back) (2) Subwoofer Pre-out (1) 1/4" Headphones (front) |
Other Ports: | (1) IR Remote Control (1) Setup Mic (front) (1) RS232 (1) 12V Trigger out Zone 2 |
Video Input Conversion: | HDMI® Video Upscaling to 4K with Qdeo™ Technology by Marvell 4K Passthrough from Compatible Source Devices via HDMI |
Wireless: | Built-in Wi-Fi |
Bluetooth: | Bluetooth Version 2.1 + EDR Capability (Compatible Profile: A2DP v1.2, AVRCP v1.3) with Advanced Music Optimizer DSP Technology |
HDMI Support: | 4K/60 Hz, 3D, Audio Return Channel, DeepColor™, x.v.Color™, LipSync, Dolby Atmos®, Dolby® TrueHD, DTS-HD Master Audio™, DVD-Audio, Super Audio CD, Multichannel PCM, and CEC |
Video: | |
---|---|
Input Sensitivity: | 1.0 Vp-p/75Ω (Component Y) 0.7 Vp-p/75Ω (Component PB/CB, PR/CR) 1.0 Vp-p/75Ω (Composite) |
Frequency Response: | 5Hz - 100MHz/+0 dB, -3 dB |
Tuner: | |
---|---|
Frequency Range: | FM: 87.5MHz - 107.9MHz AM: 530kHz - 1710kHz FM/AM Preset Memory: 40 Stations |
General: | |
---|---|
Power Supply: | AC 120V, 60Hz |
Power Consumption: | 8.1A Standby: 0.1W |
No-Sound Power Consumption: | 90W |
Dimensions: | 17.1"(W) x 7.8"(H) x 15.75"(D) |
Weight: | 34.2 lbs |
In the box:
- Onkyo TX-NR838 7.2-Ch Dolby Atmos Ready Network A/V Receiver w/ HDMI 2.0
- Remote Control with 2 AA Batteries
- FM Antenna
- AM Loop Antenna
- Setup Microphone
- Speaker Cable Labels
- CD-ROM with Manual
Specs
Amplifier: | |
---|---|
Channels: | 7.2 |
All Channels: | 130W (8 Ohms, 20 Hz-20 kHz, 0.08%, 2 channels driven, FTC) 160W (6 Ohms, 1 kHz, 0.7%, 2 channels driven, FTC) |
Dynamic Power (front): | 300W (3Ω, Front) 250W (4Ω, Front) 150W (8Ω, Front) |
THD+N: | 0.08% (20Hz - 20kHz, Half Power) |
Damping Factor: | 60 (Front, 1kHz, 8Ω) |
Input Sensitivity & Impedance: | 200 mV/47 kΩ (Line) 2.5 mV/47 k-ohms (Phono MM) |
Rated RCA Output Level & Impedance: | 200 mV/2.2 k-ohms (Line out) |
Maximum RCA Output Level & Impedance: | 4.6 V/470 Ohms (Line Out) |
Phono Overload: | 70 mV (MM, 1 kHz, 0.5%) |
Frequency Response: | 5 Hz - 100 kHz/+1 dB, -3 dB (Direct Mode) |
Tone Control: | ±10 dB, 30Hz (Bass) ±10 dB, 20kHz (Treble) |
Signal to Noise Ratio: | 106 dB (Line, IHF-A) 80 dB (Phono MM, IHF-A) |
Speaker Impedance: | 4 - 16Ω or 6 - 16Ω |
System: | |
---|---|
Processing: | Dolby Atmos, TrueHD, DD Plus, PLIIz DTS-HD Master Audio 192kHz/24-bit D/A Converters Dual 32-Bit Digital Signal Processing Engines Theater-Dimensional Virtual Surround Function Direct Mode and Pure Audio Mode |
Internet Radio Services | Pandora, Spotify, Sirius/XM, Slacker, Aupeo!, TuneIn |
Inputs: | (7) HDMI (1 MHL-Enabled front) (2) Digital Audio (optical) (3) Digital Audio (coaxial) (6) Analog Audio (3) Composite Video (1) Component Video (1) RJ-45 (1) USB (front) (1) FM Antenna (1) AM Antenna (1) Phono |
Outputs: | (2) HDMI (1) Composite Video (1) Component Video Binding Post Terminals (L/R) (1) Zone 2 PRE Line-out (L/R) (1) Zone 3 PRE Line-out (L/R) (4) PRE Out (L/R) (Front, Center, Surround, Back) (2) Subwoofer Pre-out (1) 1/4" Headphones (front) |
Other Ports: | (1) IR Remote Control (1) Setup Mic (front) (1) RS232 (1) 12V Trigger out Zone 2 |
Video Input Conversion: | HDMI® Video Upscaling to 4K with Qdeo™ Technology by Marvell 4K Passthrough from Compatible Source Devices via HDMI |
Wireless: | Built-in Wi-Fi |
Bluetooth: | Bluetooth Version 2.1 + EDR Capability (Compatible Profile: A2DP v1.2, AVRCP v1.3) with Advanced Music Optimizer DSP Technology |
HDMI Support: | 4K/60 Hz, 3D, Audio Return Channel, DeepColor™, x.v.Color™, LipSync, Dolby Atmos®, Dolby® TrueHD, DTS-HD Master Audio™, DVD-Audio, Super Audio CD, Multichannel PCM, and CEC |
Video: | |
---|---|
Input Sensitivity: | 1.0 Vp-p/75Ω (Component Y) 0.7 Vp-p/75Ω (Component PB/CB, PR/CR) 1.0 Vp-p/75Ω (Composite) |
Frequency Response: | 5Hz - 100MHz/+0 dB, -3 dB |
Tuner: | |
---|---|
Frequency Range: | FM: 87.5MHz - 107.9MHz AM: 530kHz - 1710kHz FM/AM Preset Memory: 40 Stations |
General: | |
---|---|
Power Supply: | AC 120V, 60Hz |
Power Consumption: | 8.1A Standby: 0.1W |
No-Sound Power Consumption: | 90W |
Dimensions: | 17.1"(W) x 7.8"(H) x 15.75"(D) |
Weight: | 34.2 lbs |
In the box:
- Onkyo TX-NR838 7.2-Ch Dolby Atmos Ready Network A/V Receiver w/ HDMI 2.0
- Remote Control with 2 AA Batteries
- FM Antenna
- AM Loop Antenna
- Setup Microphone
- Speaker Cable Labels
- CD-ROM with Manual
Sales Stats
- Speed to First Woot:
- 11h 22m 30.552s
Purchaser Experience
Purchaser Seniority
Quantity Breakdown
Percentage of Sales Per Hour
12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
---|
Percentage of Sales Per Day
Mon | Tue | Wed | Thu | Fri | Sat | Sun |
---|
Woots by State
Best sellers
-
(NEW) Neat Bumblebee II Professional Cardioid USB Condenser Microphone$1699 $99.9983% off Reference Price
-
Apple Watch Braided Solo Loop - Black, White Hues$2999 $99.0070% off Reference Price
-
Samsung 15W Wireless Fast Charger Duo Pad$1999 $69.9571% off Reference Price
-
Apple Watch Braided Solo Loop - Blue Hues$2999 $99.0070% off Reference Price