• The resin bubble remover boasts a 99% bubble elimination rate, quickly removing bubbles in just 5–9 minutes. With an ultra-large 3.4-liter capacity, it can process up to 32 oz of resin in a single cycle. Dimensions: 12.99 inches (L) x 8.11 inches (W) x 7.87 inches (H)。
• 2.The defoaming machine features an intelligent touchscreen interface offering two time settings—12 minutes and 18 minutes—while maintaining a degassing vacuum of -97 kPa. This allows for precise adjustment based on varying resin viscosities, effectively resolving even the most stubborn air bubble issues. With real-time vacuum monitoring and a countdown timer, you can effortlessly track the degassing progress and maintain greater control over your creative workflow。
• Versatile Applications: Suitable for all bubble-elimination needs—including jewelry making, coasters, plaster casting, epoxy resin, UV resin, silicone rubber, and Taba soft gel—making it the ideal choice for art enthusiasts。
• Lid Removal Procedure: Place the resin mixing cup into the vacuum equipment. It is recommended that the resin level does not exceed 85% of the cup's total volume; otherwise, the resin may overflow during the vacuuming process, and excessive heat generated during the operation could prevent air bubbles from escaping, causing them to remain trapped within the resin。
• Once the machine has finished operating, if a small amount of bubbles remains on the surface of the resin, they can be removed by spraying with alcohol, heating with a heat gun, or simply allowing the piece to sit undisturbed。
• Note: After removing the silicone lid, pressure release takes approximately 30 seconds. Waiting for less than 30 seconds may make it difficult to remove the top lid, or cause the silicone ring to dislodge or become damaged。

Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item

Warranty: 90 Day Woot Limited Warranty