The Earthquake SWAT-2.4X stereo wireless audio transceiver allows you to wirelessly play audio material from your audio source player to any speaker. Hardwiring your speakers to your sound source is costly and time-consuming. The SWAT-2.4X makes installation a snap and does not compromise sound quality for convenience. It is extremely versatile and perfect for apartments or outdoor settings. It even has microphone capability, so you can transmit voice as well. SWAT-2.4X consists of a transmitter (a unit connecting to the source) and a receiver (connecting to the amplifier or powered speaker). The SWAT-2.4X transmitter connects to a stereo, MP3 player, computer, or any other device that can play audio through a 3.5mm stereo jack or RCA output. It can also be connected directly to the speaker outputs via its high level input supporting 0.5V to 17V RMS. An RCA input connects the receiver to an amplifier or a powered speaker. Multiple receivers can connect wirelessly to one transmitter if you want the music to play in different areas or multiple systems. Extra receivers can also be purchased separately. Once the transmitter and receiver are paired, the receiver will receive signals from the transmitter automatically. If there is any interference on the current channel, you must change the transmitter’s channel; the receiver can sense the frequency change and adjust automatically. It has 20 channels, more channels than any other wireless transceiver. There is also a one in 20 million chance that the pairing channel will interfere with a different signal. Both the transmitter and the receiver must be connected to a power source, of which there are two options. One is the DC power supply, which connects to any wall outlet, and the other is USB.
- Plug and Play: SWAT-2.4X Wireless Audio Transceiver adds wireless connectivity to powered subwoofers, speakers, amplifiers, and other audio devices; It reduces cable clutter without sacrificing performance that is equal to or better than CD quality with superior low latency
- Go Wireless with Audio Devices: The SWAT-2.4X system offers wireless audio connectivity with a transmitter and receiver. The transmitter connects to audio sources, including stereos, MP3 players, computers, etc., via a 3.5mm stereo jack input. It can also connect directly to speaker outputs with its high level input plug, which supports 0.5–17V RMS
- Mass Broadcast Support: Multiple receivers can be connected wirelessly to a single transmitter, enabling audio playback in various locations or on multiple systems up to 328 ft. (100 m) away. Additional receivers are available and sold separately
- High-quality Audio Streaming: SWAT-2.4X operates on the 2.4GHz frequency band with a latency of less than 20ms. It is capable of streaming audio at up to 64kHz/16-bit x 2, surpassing CD quality. The received sound is crystal clear, stable, and free from noise, thanks to robust anti-interference technology and automatic channel scanning functionality
- Specifications: Frequency Band: 2.4Ghz; Channel Selections: 20 Channels; Sample Rate: 64kHz/16-bit x 2; Working Voltage: 3.6V–6V DC; TX Work Current: Max 120 mA; RX Work Current: Max 35 mA; Frequency Response: 20Hz–20kHz (±1dB); Latency: <0.5ms; S/N Ratio: 95dB; THD: 0.3% @ 1kHz; Dynamic Range: 90dB; Channel Separation: 70dB; THD: 0.3% @ 1 kHz; Input Interface: 3.5mm AUX and high/speaker level (0.5V to 17V RMS); Output Interface: 3.5mm AUX; Unit Dimensions HxWxD: 1 in. (25 mm) x 2.75 in. (69 mm) x 3.14 in. (80 mm)
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 90 Day Woot Limited Warranty
